DS28C16 datasheet(2/7 Pages) MAXIM

2 / 7 page

Maxim Integrated │ 2

www.maximintegrated.com

Evaluates: DS28C16 and DS2477

DS28C16 Evaluation Kit

Procedure

The following steps were performed on a Windows 10 PC

to set up the DS28C16 EV kit hardware/software:

1) Obtain the

DS28C16_Evaluation_Kit_Setup_

V1.0.exe file or the latest version.

2) In a file viewer double click on

DS28C16_Evaluation_

Kit_Setup_V1.0.exe to begin the installation.

3) Complete all steps of the interactive installation

wizard. The software opens by default when the

installation is complete.

4) Open the DS9121DQ+ socket, insert a DS28C16

into the cavity per the same orientation shown in

Figure 1, and close the burn-in socket.

5) Connect the DS9121DQ+ to the DS9481P-300# per

Figure 2.

6) Open the DS9121BQ+ socket, insert a DS2477 into

the cavity per the same orientation shown in Figure 1,

and close the burn-in socket.

7) Configure the second DS9121BQ+ socket board for

DS2477 by setting jumpers JB1, JB3, and JB4 per

Figure 3.

8) For select flows in the software that use the DS2477

coprocessor, connect both DS9121DQ+ and

DS9121BQ+ boards to the DS9481P-300# as

shown in Figure 3. For all other flow, connect only

the DS9121DQ+ board containing a DS28C16 to

the DS9481P-300# as shown in Figure 2.

9) Connect the DS9481P-300# to the PC using a USB

Type-A to Micro-USB Type-B cable.

10) Select a flow from the top-left panel in the program

and click on the

Run button to start the demo as

shown in Figure 4. More information about the avail-

able flows is available in Table 1.

Figure 1. Orientation in Burn-In Socket

DS28C16 Datasheet(PDF) 2 Page - Maxim Integrated Products