| Electronic Components Datasheet Search |
|
AND8308 Datasheet(PDF) 3 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
AND8308 Datasheet(HTML) 3 Page - ON Semiconductor |
|
3 / 4 page ![]() AND8308/D www.onsemi.com 2 Figure 2. 8 ms x 20 ms Pulse Waveform Figure 3. 10 ms x 1000 ms Pulse Waveform lp 0.9 lp 0.5 lp 0.1 lp 010 20 30 TIME ( ms) lp 0.9 lp 0.5 lp 0.1 lp 01 2 3 TIME (ms) ESD Rating: This is the survivability rating of an ESD protection diode. The most common waveform that is specified is the IEC61000−4−2 system level ESD test which is distinguished by its fast rise time and high current levels (see Figure 4). The survivability rating is typically specified by a level or input voltage level per the table below. Most system designers are required to test up to level 4 which is ±8 kV contact or 15 kV air discharge. This rating on an ESD diode datasheet is incomplete, however, since it only tells the designer what the protection diode can survive, but does not give any information as to what voltage level the ESD diode will clamp the ESD pulse to. IEC 61000−4−2 CURRENT WAVEFORM Level Test Voltage (kV) First Peak Current (A) Current at 30 ns (A) Current at 60 ns (A) 1 2 7.5 4 2 2 4 15 8 4 3 6 22.5 12 6 4 8 30 16 8 Figure 4. IEC 61000−4−2 Current Waveform Ipeak 90% 10% 100% I @ 30 ns I @ 60 ns tP = 0.7 ns to 1 ns Clamping Voltage Specs: For an ESD protection application the clamping voltage is a key parameter as it will determine the voltage that the integrated circuit (IC) that is being protected will get exposed to. As new IC’s are becoming more sensitive to ESD voltage (see AND8309/D) ESD clamping voltage is becoming a crucial parameter. Since clamping voltage is directly related to the waveform and current level of the surge event being specified it is crucial to examine the conditions of the test for which a clamping voltage is specified. To determine the protection diode with the best clamping performance for an application it is important to look at the clamping performance of the appropriate surge event for that application. Transient Surge Clamping Voltage: This spec is a key concern for high power TVS diodes. The clamping voltage is the maximum voltage drop across the TVS diode for a particular peak pulse current, IPP. Since there is no standard IPP or surge waveform for specifying a clamping voltage for ESD protection diodes there is a lot of variance from vendor to vendor. Some vendors will specify a clamping voltage per the 8 ms x 20 ms waveform at a given IPP, but this is inappropriate for ESD. The 8 ms x 20 ms waveform has a longer rise time and duration than an ESD event by orders of magnitude. TVS waveforms like the 8 ms x 20 ms are intended for applications exposed to high power surge events like lightning surges and inductive switching that may be seen in networking or automotive applications. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |