MAX22190 datasheet(4/12 Pages) MAXIM

4 / 12 page

Maxim Integrated │ 4

www.maximintegrated.com

Evaluates: MAX22190

MAX22190PMB#

PMOD Style Connector

The MAX22190PMB# can plug directly into a Pmod-

compatible port through X1. Note that the pin definitions

are determined by the USB2PMB2# adapter and, if the

user wishes to use this board with their own host, they

must configure the microcontroller or FPGA to match

MAX22190 signals. For more information on the interface

and control, refer to the MAX22190 IC data sheet.

Detailed Description of Software

For easy development and testing, Maxim provide our

Munich GUI which supports a number of different PMOD

boards using low cost USB adapters also available from

Maxim. For MAX22190PMB# use Munich GUI version

2.21 or later.

Connect to Hardware

The Device menu has options to search and connect to

the hardware (see Figure 3). Select MAX22190PMB. Use

the

Scan Adapters option to search for the USB2PMB

modules connected to the PC. If modules are found,

the serial numbers of the modules are listed in the

USB2PMBs menu item. Select the serial number in the

USB2PMBs list to connect the software to communicate

with that module. The software can only communicate to

one module at a time. Select

Connect and notice how

status changes from

Disconnected to Connected in the

lower-right area of the GUI (see Figure 4).

Figure 3. MAX22190PMB# Software (Munich GUI Device Menu)

MAX22190 Datasheet(PDF) 4 Page - Maxim Integrated Products