IL135Z

Korzhenevskogo 12, Minsk, 220064, Republic of

Belarus

Fax:

+375 (17) 278 28 22,

Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61,

277 69 16

E-mail: belms@belms.belpak.minsk.by

URL: www.bms.by

Heat conduction , (%)

Heat conduction, (%)

Time, (min)

Time, (min)

Figure 11 – Time dependence of heat

conduction in still air

Figure 12 – Time dependence of heat

conduction in agitated oil

Direct voltage, (V)

Direct current, (mА)

Figure 13 – Dependence of direct voltage on direct current

Information for application.

There is a simple technique of the device calibration for improving precision of

temperature measurement (see typical application circuits).

Calibration of the device occurs in one spot as the IC output voltage is proportional to absolute

of output voltage on temperature are determined only by characteristic incline. Therefore bias

calibration at one temperature corrects errors in the whole temperature range. Output voltage of

calibrated or non calibrated circuit may be derived from the following equation:

To

T

;

where Т – unknown temperature;