3M TelComm Products Division

PO Box 2963

Austin, TX 78769-2963

Litho in U.S.A.

1978 3M

Important Notice

All statements, technical information and recommendations related to the Seller's products are based on information believed to

be reliable, but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine

the suitability of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use.

Any statements or recommendations of the Seller which are not contained in the Seller's current publications shall have no force

or effect unless contained in an agreement signed by an authorized officer of the Seller. The statements contained herein are

made in lieu of all warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness

for a particular purpose which warranties are hereby expressly disclaimed.

SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT

NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL

DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER'S PRODUCTS THAT WERE

DEFECTIVE.

34-7010-7234-9

1.0 General

The 4051 Wire Insertion/Cut Off Tool is used to

insert wires into the "U" contact and to cut off

excess wire in Super Mini Modules when

conductor rearrangements are made inside the

module.

2.0 Application

2.01 Pull wire across top of "U" contact and cut off

blade.

781178

2.03 Align 4051 Wire Insertion/Cut Off Tool with "U"

contact and wire. The slot is aligned with the "U"

contact and the groove with the wire.

781186

2.03 Push straight down forcing the conductor into the

"U" contact. DO NOT ROCK TOOL BACK AND

FORTH.

781186

2.04 To cut off wire, align slot with cut off blade and

groove with wire. Push straight down. Remove

excess wire from module. Do not rock tool back

and forth.

781186