ANT-2.4-WRT-MON-RPS datasheet(1/2 Pages) LINX

Part #	ANT-2.4-WRT-MON-RPS

Description	Tamper resistant

PDF	2 Pages

Scroll/Zoom	100%

Manufacturer	LINX [Linx Technologies]

Direct Link	https://linxtechnologies.com/wp/

Logo

1 / 2 page

–

1 –

Revised 2/16/15

Product Description

The WRT-MON Series monopole antenna is

compact and tamper-resistant. It’s great for

applications like wireless vending machines, traffic

equipment and power equipment where space is

limited and security is important.

Unlike the WRT Series dipole antenna, the

WRT-MON Series monopole antenna requires

a proximity ground plane, which dramatically

reduces the space required inside the product.

The antenna is designed to be installed onto a

conductive surface with the metal base and nut

electrically connected to the surface serving as the

counterpoise. The antenna installs through a small

hole on the product and is anchored by a threaded

metal base connected to the coax cable shield.

An adhesive foam compression ring resists the

elements.

The WRT-MON Series antenna is available in

2.45GHz. It’s attached to a 216.0 mm (8.5")

long coax cable with an RP-SMA, SMA or U.FL/

MHF-compatible connector on the other end. The

RP-SMA and SMA connectors use an RG-174

coax. The U.FL/MHF connector uses a 1.32 mm

micro-coax. More connectors, colors and coax

length options are available for OEM customers.

Features

• Compact

• Tamper resistant

• Low cost

• Indoor / outdoor

Electrical Specifications

Center Frequency:

2.45GHz

Recom. Freq. Range:

2.4–2.5GHz

Wavelength:

¼-wave

VSWR:

≤ 1.9 typical at center

Peak Gain:

0.8dBi

Impedance:

50-ohms

Connector:

RP-SMA, SMA or U.FL / MHF

Cable:

RG-174, RP-SMA & SMA

1.32 mm U.FL

Oper. Temp. Range:

–30°C to +80°C

Max. Recom. Torque:

4.0 kgf-cm

Electrical specifications and plots measured on 10.16 cm x

10.16 cm (4.00" x 4.00”) reference ground plane

ANT-2.4-WRT-MON-xxx

Data Sheet

by

Ordering Information

ANT-2.4-WRT-MON-RPS (with RP-SMA connector)

ANT-2.4-WRT-MON-SMA (with SMA connector)

ANT-2.4-WRT-MON-UFL (with U.FL / MHF

compatible connector)

Cable Length

216.0 mm

(8.50")

27.0 mm

(1.06")

7/16-28

UNEF-2A

Thread

Adhesive Ring

Remove protective plastic

before installation

SMA or

RP-SMA

U.FL

or

i-PEX silouette

shown in

shadow

8.5 mm

(0.34")

10.3 mm

(0.41")

19.0 mm

(0.75")

Similar Part No. - ANT-2.4-WRT-MON-RPS

Manufacturer	Part #	Datasheet	Description
List of Unclassifed Man...	ANT-2.4-WRT-RPS	859Kb / 1P	Adhesive or permanent mount
	ANT-2.4-WRT-SMA	859Kb / 1P	Adhesive or permanent mount
	ANT-2.4-WRT-UFL	859Kb / 1P	Adhesive or permanent mount
	ANT-2.4-WRT-XXX	859Kb / 1P	Adhesive or permanent mount

More results

Similar Description - ANT-2.4-WRT-MON-RPS

Manufacturer	Part #	Datasheet	Description
LSI Computer Systems	LS7225	842Kb / 7P	DIGITAL LOCK CIRCUIT with Tamper Output
Systemsensor advanced i...	546-8000	130Kb / 2P	Cover Tamper Switch
3M Electronics	7613T	553Kb / 4P	3M??Tamper-Evident Label Materials
List of Unclassifed Man...	AX102197	124Kb / 3P	Tamper-resistant key design ??prevents intruder access
E-SWITCH	PV2	169Kb / 1P	VANDAL RESISTANT
List of Unclassifed Man...	TANGO-20A	990Kb / 3P	Vandal resistant
Qualtek Electronics Cor...	739W-X2-45	417Kb / 1P	TAMPER RESISTANT AC RECEPTACLE
Qualtek Electronics Cor...	739W-X2-45-WH1	418Kb / 1P	TAMPER RESISTANT AC RECEPTACLE
ZF Friedrichshafen AG	E72	2Mb / 2P	Moisture resistant
List of Unclassifed Man...	SHM	2Mb / 2P	EXTERNAL ??TAMPER PROOF

More results

ANT-2.4-WRT-MON-RPS Datasheet(PDF) 1 Page - Linx Technologies

ANT-2.4-WRT-MON-RPS Datasheet(HTML) 1 Page - Linx Technologies

Similar Part No. - ANT-2.4-WRT-MON-RPS

Similar Description - ANT-2.4-WRT-MON-RPS

Html Pages

1 2

Datasheet Download

Link URL