AOU405 datasheet(2/5 Pages) AOSMD

2 / 5 page

AOU405

Symbol

Min

Typ

Max

Units

BVDSS

-30

-0.003

-1

TJ=55°C

-5

IGSS

±100

VGS(th)

-1.2

-2

-2.4

ID(ON)

-40

TJ=125°C

Ω

gFS

VSD

-0.76

-1

-18

Ciss

920

1100

Coss

190

Crss

122

3.6

4.5

Ω

Qg(10V)

18.7

Qg(4.5V)

9.7

11.7

Qgs

2.54

Qgd

5.4

tD(on)

913

tD(off)

trr

21.4

Qrr

THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL

COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING

OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,

FUNCTIONS AND RELIABILITY WITHOUT NOTICE.

Maximum Body-Diode Continuous Current

Input Capacitance

Output Capacitance

Turn-On DelayTime

DYNAMIC PARAMETERS

VGS=0V, VDS=-15V, f=1MHz

Gate Drain Charge

Total Gate Charge (10V)

VGS=-10V, VDS=-15V, ID=-18A

Turn-On Rise Time

Turn-Off DelayTime

VGS=-10V, VDS=-15V,

RL=0.82Ω, RGEN=3Ω

Gate resistance

VGS=0V, VDS=0V, f=1MHz

Turn-Off Fall Time

SWITCHING PARAMETERS

Total Gate Charge (4.5V)

Gate Source Charge

Ω

VGS=-4.5V, ID=-10A

IS=-1A,VGS=0V

VDS=-5V, ID=-18A

RDS(ON)

Static Drain-Source On-Resistance

Forward Transconductance

Diode Forward Voltage

IDSS

µA

Gate Threshold Voltage

VDS=VGS ID=-250µA

VDS=-24V, VGS=0V

VDS=0V, VGS=±20V

Zero Gate Voltage Drain Current

Gate-Body leakage current

Electrical Characteristics (TJ=25°C unless otherwise noted)

STATIC PARAMETERS

Parameter

Conditions

Body Diode Reverse Recovery Time

Body Diode Reverse Recovery Charge IF=-18A, dI/dt=100A/µs

Drain-Source Breakdown Voltage

On state drain current

ID=-250µA, VGS=0V

VGS=-10V, VDS=-5V

VGS=-10V, ID=-18A

Reverse Transfer Capacitance

IF=-18A, dI/dt=100A/µs

A: The value of RθJA is measured with the device mounted on 1in

2 FR-4 board with 2oz. Copper, in a still air environment with T

A =25°C. The

Power dissipation PDSM is based on R θJA and the maximum allowed junction temperature of 150°C. The value in any given application depends

on the user's specific board design, and the maximum temperature of 175°C may be used if the PCB allows it.

B. The power dissipation PD is based on TJ(MAX)=175°C, using junction-to-case thermal resistance, and is more useful in setting the upper

dissipation limit for cases where additional heatsinking is used.

C: Repetitive rating, pulse width limited by junction temperature TJ(MAX)=175°C.

D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient.

E. The static characteristics in Figures 1 to 6 are obtained using <300

µs pulses, duty cycle 0.5% max.

F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink,

assuming a maximum junction temperature of TJ(MAX)=175°C.

G. The maximum current rating is limited by bond-wires.

H. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with TA=25°C. The SOA

curve provides a single pulse rating.

I. Revision 0: August 2005

Alpha & Omega Semiconductor, Ltd.

AOU405 Datasheet(PDF) 2 Page - Alpha & Omega Semiconductors

AOU405 Datasheet(HTML) 2 Page - Alpha & Omega Semiconductors

Html Pages

1 2 3 4 5

Datasheet Download

Link URL