| Electronic Components Datasheet Search |
|
ANT-916-WRT-RPS Datasheet(PDF) 3 Page - Linx Technologies |
|
|
|||||||||||||||||||||||||||||
ANT-916-WRT-RPS Datasheet(HTML) 3 Page - Linx Technologies |
|
3 / 12 page ![]() 3 Datasheet WRT Series ANT-916-WRT-ccc Recommended Mounting The recommended enclosure mounting dimensions are shown in Figure 2. The ANT-916-WRT series antenna is supplied with an integrated closed-cell pressure sensitive adhesive ring which helps seal enclosures against external elements. The adhesive ring has a protective plastic backing that must be removed prior to installation. A pull tab has been provided for easy removal of the protective backing. The antenna can be permanently mounted using the provided hex nut which should be tightened to 3.0 kgf/cm (5 in/lbs) max. The recommended maximum enclosure wall thickness is 3.18 mm (0.125 in). DB1 10.0 mm (0.39 in) Adhesive Ring Hex Nut M11 x 1.0 mm 216.0 mm (8.5 in) -RPS, -SMA -MHF1/-U.FL -MHF4 -MMCX Ø19.0 mm (0.75 in) Ø10.8 mm (0.43 in) 8.0 mm (0.32 in) 32.5 mm (1.28 in) Ø5.3 mm (0.21 in) Counterpoise 868 MHz 85.0 mm (3.35 in) 10.0 mm (0.39 in) Adhesive Ring Hex Nut M11 x 1.0 mm 216.0 mm (8.5 in) -SMA, -RPS -MHF1/U.FL Ø19.0 mm (0.75 in) 8.0 mm (0.32 in) Ø5.3 mm (0.21 in) Counterpoise 916 MHz Recommended Mounting 82.5 mm (3.25 in) 10.0 mm (0.39 in) Adhesive Ring Hex Nut M11 x 1.0 mm 216.0 mm (8.5 in) 305.0 mm (12.0 in) -SMA, -RPS -SMA-A Ø19.0 mm (0.75 in) 8.0 mm (0.32 in) Ø5.3 mm (0.21 in) Counterpoise -MHF1/U.FL Figure 2. ANT-916-WRT Series Antenna Recommended Enclosure Mounting Dimensions Antenna Orientation The ANT-916-WRT series antenna is characterized in two antenna orientations as shown in Figure 3. The antenna characterizaton with an adjacent ground plane (102 mm x 102 mm) provides insight into antenna performance when attached directly to a printed circuit board mounted connector, and with the antenna In free space characterizes use of an antenna attached to an enclosure-mounted connector which is connected by cable to a printed circuit board. The two orientations represent the most common end- product use cases. Center of Ground Plane Free Space Figure 3. ANT-916-WRT Test Orientations |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |