SPC58EE80C3 datasheet(14/154 Pages) STMICROELECTRONICS

14 / 154 page

Electrical characteristics

SPC58EEx, SPC58NEx

14/154

DS11646 Rev 4

Electrical characteristics

3.1

Introduction

The present document contains the target Electrical Specification for the 40 nm family 32-bit

MCU SPC58xEx products.

In the tables where the device logic provides signals with their respective timing

characteristics, the symbol “CC” (Controller Characteristics) is included in the “Symbol”

column.

In the tables where the external system must provide signals with their respective timing

characteristics to the device, the symbol “SR” (System Requirement) is included in the

“Symbol” column.

The electrical parameters shown in this document are guaranteed by various methods. To

give the customer a better understanding, the classifications listed in Table 3 are used and

the parameters are tagged accordingly in the tables where appropriate.

Table 3. Parameter classifications

Classification tag

Tag description

Those parameters are guaranteed during production testing on each individual device.

NOTE: Parameters specified at junction temperature TJ = 165 °C are tested at TJ = 150 °C in

production. Evaluation at higher temperature is performed during Design and Validation

phases.

Those parameters are achieved by the design characterization by measuring a statistically

relevant sample size across process variations.

Those parameters are achieved by design validation on a small sample size from typical

devices.

Those parameters are derived mainly from simulations.

SPC58EE80C3 Datasheet(PDF) 14 Page - STMicroelectronics