NOTES:

The connection circuit shown above is for the MSK 1911. Lp is an optional external component and must not be

located near ground planes if possible. Use an inductor with a high self-resonant frequency that can withstand the

currents required for the application. The ferrite beads should be located as close to the DUT as possible. Fare-Rite

Corporation P/N 2743001111 beads work well for most applications. For additional applications information, please

contact the factory. Evaluation amplifiers with test boards are readily available from M.S.Kennedy Corp.

TYPICAL CONNECTION CIRCUIT

5

Rev. D 8/00