Description:

MAGIGOO® - Polycarbonate, is an all-in-one 3D printing adhesive that offers sure

adhesion with easy release for polycarbonate based filaments. Magigoo

Polycarbonate, has been specifically formulated for polycarbonate filaments to

ensure that it provides an easy to use solution to reduce warping in FDM/FFF 3D

printers. Warping, among other factors, is caused by the differential cooling of a print

during the 3D printing process, especially on higher temperature filaments such as

polycarbonate. A heated bed could help reduce warping but for printing repeatability

and reliability and sure adhesion, MAGIGOO® - Polycarbonate is needed.

Technical specifications:

Properties:

MAGIGOO® - Polycarbonate, acts as a thermally activated interfacial layer,

allowing for better interactions, both at the micro and molecular level,

between the printing bed and the printing materials. It is generally

recommended to print according to the printing temperatures recommended

by the filament supplier. The printing conditions vary between one printer and

another.

Intended use:

To be used on FDM/FFF 3D printers with a heated bed on glass surfaces. Also works

when applied on sheets e.g. Kapton, PEI and similar. To be used with Polycarbonate

plastics only.

2

info@magigoo.com

www.magigoo.com

MAGIGOO

Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate

Paola, PLA3000, Malta

1