 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
LPS172 Datasheet(PDF) 1 Page - Astec America, Inc |
|
|
|||||||||||||||||||||||||||||
LPS172 Datasheet(HTML) 1 Page - Astec America, Inc |
|
|
1 / 2 page  Technical Support: (888) 41-ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 118 Special Features Electrical Specs • Active power factor correction • IEC EN61000-3-2 compliance • Wide Range Adjustable output Remote sense on main output • Single wire current sharing • Power fail and remote inhibit • Built-in EMI filter • Low output ripple • Overvoltage protection • Overload protection • Thermal overload protection • DC power good • 5 V standby output • 12 V Aux output • Optional cover (-C suffix) Operating temperature: 0° to 50°C ambientderate each output at 2.5% per degree from 50° to 70°C Electromagnetic susceptibility: designed to meet IEC EN61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational Storage temperature: -40° to 85°C Temperature coefficient: ± .04% per °C MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions Input Input range 85-264 VAC, 120-300 VDC Frequency 47-63 Hz Inrush current 38 A max, cold start @ 25°C Efficiency 75% typical at full load EMI filter Meets FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted Power factor 0.99 typical Safety ground leakage current 1.0 mA @ 50/60 Hz, 264 VAC input Output Maximum power 110 W convection (75 W with cover) 175 W with 30 CFM forced air (130 W with cover) Adjustment range 2:1 wide ratio minimum Hold-up time 20 ms @175 W load at nominal line Overload protection Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating Overvoltage protection 10% to 40% above nominal output Standby output 5 V @ 2A regulated ±5% Aux output 12 V @ 1 A -5 %, +10% Logic Control Power failure TTL logic signal goes high 100 - 500 msec after V1 output; It goes low at least 4 msec before loss of regulation Remote inhibit Requires contact closure to inhibit outputs Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. DC-OK TTL logic signal goes high after main output is in regulation. It goes low when there is a loss of regulation VDE 0805/EN60950 (IEC950) UL UL1950 CB Certificate and report CSA CSA 22.2-234 Level 3 CE Mark (LVD) NEMKO EN 60950/EMKO-TUE Environmental Safety 175 Watts LPS170 Series Total Power: 110-175 Watts Input Voltage: 85-264 VAC 120-300 VDC # of Outputs: Single rev 08.09.03 |
Similar Part No. - LPS172 |
|
Similar Description - LPS172 |
|
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
