| Electronic Components Datasheet Search |
|
LPS22DF Datasheet(PDF) 35 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LPS22DF Datasheet(HTML) 35 Page - STMicroelectronics |
|
35 / 54 page ![]() Table 19. Power consumption AVG One-shot mode Continuous mode – current consumption (μA) vs. ODR Current consumption (μA) @ 1 Hz ODR Max 1 Hz 4 Hz 10 Hz 25 Hz 50 Hz 75 Hz 100 Hz 200 Hz 512 32.2 25 32.8 126.8 314.4 783.8 - - - - 128 9.4 75 10 35.6 86.7 214.3 427 639.8 - - 64 5.6 100 6.3 20.4 48.7 119.4 237.2 355 472.8 - 32 3.7 200 4.4 12.8 29.8 71.9 142.2 212.6 282.9 564.4 16 2.7 300 3.5 9 20.2 48.2 94.8 141.4 188 374 8 2 400 2.7 6 12.6 29.1 56.5 84.2 111.5 221.7 4 1.7 500 2.5 5 10.2 23.2 44.7 66.2 87.8 174 The noise performance of LPS22DF is also defined as depending on the ODR and selected resolution and its performance is a trade-off between the power consumption and resolution. The noise performance is indicated in the following table. Table 20. Noise performance AVG Pressure noise (Parms) ODR/2(1) ODR/4 ODR/9 512 0.59 0.44 0.34 128 0.90 0.67 0.48 64 1.20 0.86 0.64 32 1.64 1.16 0.87 16 2.30 1.63 1.18 8 3.12 2.18 1.60 4 4.26 2.87 2.20 1. LPF1 filter is disabled. When the ODR bits are set to '0000', the device is in Power-down mode. When the device is in Power-down mode, almost all internal blocks of the device are switched off to minimize power consumption. The digital interface is still active to allow communication with the device. The content of the configuration registers is preserved and output data registers are not updated, therefore keeping the last data sampled in memory before going into power-down mode. If the ONESHOT bit in CTRL_REG2 (11h) is set to '1', One-shot mode is triggered and a new acquisition starts when it is required. Enabling this mode is possible only if the device was previously in power-down mode (ODR bits set to '0000'). Once the acquisition is completed and the output registers updated, the device automatically enters in power-down mode. ONESHOT bit self-clears itself. When the ODR bits are set to a value different than '0000', the device is in Continuous mode and automatically acquires a set of data (pressure and temperature) at the frequency selected through the ODR[3:0] bits. LPS22DF CTRL_REG1 (10h) DS13316 - Rev 1 page 35/54 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |