Revision history

Table 9. Document revision history

Date

Revision

Changes

30-Nov-2001

1

Initial release.

01-Jul-2005

2

PPAP references inserted in the datasheet, see Table 3: Order codes.

ESD protection inserted in Table 1 on page 4.

31-Oct-2005

3

An error in the device description was corrected on page 1.

PPAP reference inserted in the datasheet see Table 3: Order codes.

Minor grammatical and formatting changes throughout.

18-Jun-2007

4

Values for thermal resistance junction to ambient and ESD HBM corrected in Table 1: Absolute maximum ratings

(AMR).

Values for thermal resistance junction to case added in Table 1: Absolute maximum ratings (AMR).

Table 2: Operating conditions added.

Electrical characteristics figure captions updated.

Section 6: Package information updated.

Table 3: Order codes moved to end of document.

18-Dec-2007

5

Removed power dissipation parameter from AMR table and added maximum junction temperature.

Updated footnotes for automotive grade order codes.

Updated format of package information.

16-Feb-2012

6

Added AMR values for input current in Table 1 on page 4.

Added QFN16 3 x 3 mm package information in Chapter 7: Ordering information.

Removed LM2902YD order code from Table 3 and changed status of LM2902YPT order code.

29-Jan-2013

7

Small text/layout changes in Features and Description.

Updated Figure 2: Pin connections (top view).

Table 3: VCC+ = 5V, VCC- = Ground, Vo = 1.4V, Tamb = 25° C (unless otherwise specified): DVio replaced by

DVio/DT.

Replaced SO-14 package silhouette, package mechanical drawing (Figure 29) and package mechanical data

(Table 5).

11-Jan-2017

8

Removed DIP package.

Figure 2. Schematic diagram (1/4 LM2902): removed two diodes

Table 1. Absolute maximum ratings (AMR): updated value of VCC

Updated TSSOP14 package for L and aaa parameters

31-Aug-2022

9

Added Section 7.4 QFN16 3x3 wettable flank package information

Updated Section 8 Ordering information

LM2902

DS0506 - Rev 9

page 19/20