MS6313ASU datasheet(4/7 Pages) MOSA

4 / 7 page

MOSA ELECTRONICS

MS6313

Stereo Audio DAC

- 4 -

www.mosanalog.com.tw

TYPICAL PERFORMANCE CHARACTERISTICS

(Ta=25℃, RL=32Ω, sampling rate=4fs; unless otherwise specified)

FREQUENCY (Hz)

THD+N vs. frequency

VDD=5V

VDD=2.7V

TIMING AND DATA FORMAT

The MS6313 accepts input serial data formats of 16-bit word length. Left and right data words are time

multiplexed. The MSB (bit 1) must always be first. The format of data input is shown in Figs. 2 and 3. With a HIGH

level on the word select input (WS), data is placed in the left input register and with LOW level on the WS input, data is

placed in the right register (Fig. 1). The data in the input registers are simultaneously latched in the output registers

which control the bit switches. Internal bias currents IBL and IBR are each added to the full scale output current IFS in

order to achieve the maximum dynamic range at the outputs of OP1 and OP2(Fig. 1). The reference voltage Vref (Fig. 1)

is approximately 2/3 VDD. In this way the maximum dynamic range is achieved over the entire power supply range.

RIGHT

BCK

DATA

LSB

MSB

LEFT

Fig.2

Timing and input signals.

210

MSB

LSB

MSB

LSB

RIGHT

LEFT

BCK

DATA

Fig.3

Format of input signals.

MS6313ASU Datasheet(PDF) 4 Page - MOSA ELECTRONICS