FEATURES

SA2002P / SA2002D / SA2102D. All devices are PDIP20,

except for the SA2002P which is PDIP16.

power supply by means of screw terminals.

(20mA).

LEDs.

sames

sames

PM4100APD Application Note:

Energy Meter Evaluation Module

PM4100APD

1/14

SPEC-1042 (REV. 3)

15-10-03

Figure 1: Functional Diagram

resistor).

screw terminals.

digital Eeprom.

INTRODUCTION

The PM4100AD evaluation module is designed to demonstrate

the functionality of the following devices SA4102A, SA2002E,

SA2002H, SA2002P, SA2002D and SA2102D. The module is

easily configured and setup for the various devices by means of

on-board jumpers. The setup of the module is simplified with the

help of the accompanying software that illustrates the jumper

positions for each device.

The measured energy is displayed on an on-board LED

(PULSE), while a stepper motor counter or impulse counter can

be connected to the screw terminals provided. A second LED

(DIR) is used to indicate the energy direction.

This application note should be used in conjunction with each

device's specific datasheet for the individual device

specifications and characteristics.

DEVICE

4N35

GND

IIN

IIP

STEPPER

COUNTER

PULSE

MICRO

PROGRAMER

LIVE

NEUTRAL

GND

DIR

PULSE