IP67 datasheet(2/4 Pages) ETC

2 / 4 page

Ingress Protection

Testing

Temperature Testing

Humidity Testing

Vent durability in a range

of temperatures

Methods:

•

IEC 60068-2-1 (to -40 °C)

•

IEC 60068-2-2 (to +125 °C,

or +150 °C for PolyVent XS)

•

IEC 60068-2-14 (cycling:

-40 °C to +125 °C, or to

+150 °C for PolyVent XS)

Vent durability in hot, humid

environments (accelerated

aging test)

Method:

•

IEC 60068-2-78

Test conditions:

85 °C

85% relative humidity

1,000 hours

Vent protection against ingress

of particulates and water

Method:

•

IEC 60529

IP66

IP67

IP68 (extended immersion:

2 meters for 1 hour)

IP69k (for Standard, High

Airflow, XL and

Stainless Steel vents)

Environmental Performance

GORE® Vents Screw-In Series have been tested by independent

laboratories and have been verified to meet these performance

standards.

All certificates are available upon request.

Housing wall

60° 2°

Center axis of through-hole

Housing wall

Center axis of through-hole

60° 2°

Housing wall

45° 1°

Center axis

of through-hole

GORETM MembraneO-Ring 4.8x1.4

11.5 0.4

Product Information

Protective Vents

adhesive vents

screw-in series

Product Name

PolyVent XS

PolyVent Standard

PolyVent High Airflow

PolyVent XL

PolyVent Stainless Steel

Thread Size

M6x0.75

M12x1

M12x1.5

M32x1.5

M12x1.5

Product Number

PMF100600

PMF100318 (black) / PMF100319(grey)

PMF100320 (black) / PMF100321(grey)

PMF100585 (black) / PMF100586 (grey)

PMF200542

PMF200444

Product Performance Characteristics

Typical airflow

300 ml /min (dp = 70 mbar)

450 ml /min (dp = 70 mbar)

4000 ml /min (dp = 70 mbar)

16 l /min (dp = 12 mbar)

1600 ml /min (dp = 70 mbar)

Laminate: membrane/

backing material

ePTFE / –

ePTFE /Polyester (PET)

ePTFE /–

Membrane characteristic

Oleophobic

Vent body & cap: material

Polyamide (PA6/66)

Polyamide (PA6)

Polycarbonate (PC)

Stainless steel (1.4404 /316L)

Vent body & cap: color

Black: RAL 9004

Black: RAL 9011/Grey: RAL 7035

Black: RAL 9011 /Grey: RAL 7035

Grey: RAL 7035

Metallic

Wrench size

10 mm

16 mm

70 mm

18 mm

O-Ring material

Silicone 60 Shore A

Counter nut: material/

color/part number

n/a

Plastic/Grey/M10510-009

Plastic /Grey /M10510-009

Plastic /Grey /M10510-010

Nickel-plated brass /M10510-008

Traceability

Yes: Individually laser-marked

Design and Dimensions

Units are in mm

Recommended Installation

Units are in mm

• Install on a flat, vertical housing

surface where water or other

contaminants will not pool.

• Install vent with cap on exterior

of housing.

Recommended torque

0.3 ± 0.1 Nm

0.7 ± 0.1 Nm

5 Nm

0.9

± 0.3 Nm

Through-hole diameter

–

12.2

± 0.1 mm

12.2

± 0.1 mm

± 0.5 mm

12.2 ± 0.1 mm

GORETM Membrane

O-Ring 10x2

10.55

0.15

GORETM Membrane

O-Ring 10x2

15.55 0.15

advanced cap

IP67 Datasheet(PDF) 2 Page - List of Unclassifed Manufacturers

IP67 Datasheet(HTML) 2 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4

Datasheet Download

Link URL