| Electronic Components Datasheet Search |
|
ACAS0612AT Datasheet(PDF) 6 Page - Vishay Siliconix |
|
|
|||||||||||||||||||||||||||||
ACAS0612AT Datasheet(HTML) 6 Page - Vishay Siliconix |
|
6 / 9 page ![]() ACAS 0606 AT, ACAS 0612 AT - Precision www.vishay.com Vishay Beyschlag Revision: 17-Aug-2022 6 Document Number: 28770 For technical questions, contact: thinfilmarray@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TESTS AND REQUIREMENTS All tests are carried out in accordance with the following specifications: EN 60115-1, generic specification EN 60115-8 (successor of EN 140400), sectional specification EN 140401-801, detail specification IEC 60068-2-xx, test methods The parameters stated in the Test Procedures and Requirements table are based on the required tests and permitted limits of EN 140401-801. The table presents only the most important tests, for the full test schedule refer to the documents listed above. However, some additional tests and a number of improvements against those minimum requirements have been included. The testing also covers most of the requirements specified by EIA/ECA-703 and JIS-C-5201-1. The tests are carried out under standard atmospheric conditions in accordance with IEC 60068-1, 4.3, whereupon the following values are applied: Temperature: 15 °C to 35 °C Relative humidity: 25 % to 75 % Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar) A climatic category LCT / UCT / 56 is applied, defined by the lower category temperature (LCT), the upper category temperature (UCT), and the duration of exposure in the damp heat, steady state test (56 days). The components are mounted for testing on printed circuit boards in accordance with EN 60115-8, 2.4.2, unless otherwise specified. TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 (1) TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (2) ( ΔR) Stability for product types: ACAS 0606 AT ACAS 0612 AT 47 Ω to 150 kΩ 47 Ω to 150 kΩ 4.5 - Resistance - ± 0.1 % 4.8 - Temperature coefficient At (20/-55/ 20) °C and (20/155/20) °C ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K 4.25.1 - Endurance at 70 °C: Standard operation mode U = or U = Umax.; 1.5 h on; 0.5 h off; whichever is the less severe; 1000 h: Absolute Relative ± (0.1 % R + 0.05 Ω) ± (0.05 % R + 0.05 Ω) 8000 h: Absolute Relative ± (0.25 % R + 0.05 Ω) ± (0.125 % R + 0.05 Ω) Endurance at 70 °C: Power operation mode U = or U = Umax.; 1.5 h on; 0.5 h off; whichever is the less severe; 1000 h: Absolute Relative ± (0.25 % R + 0.05 Ω) ± (0.125 % R + 0.05 Ω) 8000 h: Absolute Relative ± (0.5 % R + 0.05 Ω) ± (0.25 % R + 0.05 Ω) 4.25.3 - Endurance at upper category temperature 125 °C; 1000 h: Absolute Relative ± (0.25 % R + 0.05 Ω) ± (0.125 % R + 0.05 Ω) 125 °C; 8000 h: Absolute Relative ± (0.5 % R + 0.05 Ω) ± (0.25 % R + 0.05 Ω) 155 °C; 1000 h: Absolute Relative ± (0.4 % R + 0.05 Ω) ± (0.2 % R + 0.05 Ω) 4.24 78 (Cab) Damp heat, steady state (40 ± 2) °C; 56 days; (93 ± 3) % RH ± (0.25 % R + 0.05 Ω) P 70 x R P 70 x R |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |