BLUESHIFT®

PRODUCT DATA SHEET

* DISCLAIMER: Blueshift MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE. All of the descriptive information, the typical performance data, and recommendations

for the use of Blueshift products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product.

Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind

by Blueshift. All purchasers of Blueshift products shall be responsible for independently determining the suitability of the material for the purpose for which it is

purchased, and for performing any additional testing that may be necessary to support purchaser’s intended use. No distributor, salesman, or representative of

Blueshift is authorized to give any warranty, guaranty, or make any representation in addition or contrary to the above.

Date Updated: 10/5/2022

5 South Spencer Road

Spencer, MA 01562

United States of America

+1 (888) 350-7586

www.blueshiftmaterials.com

ROCKETAPE™ RTVDAS Aluminized Polyimide Heat Resistant Thermal

Insulation Tape

Features

 Ultra-thin and lightweight thermal insulation tape

 High infrared heat reflectivity (low emissivity)

 Easy peel and stick application to flat or complex 3D surfaces

 Excellent adhesion onto a wide range of substrates

 For interior or exterior surfaces

 Highly insulative with low thermal conductivity

• Protects sensitive components from extreme

temperature swings

• Isolates high temperature zones (hot spot reduction)

• Enhances thermal endurance of parts/devices

• Enables component size reduction

 Flame retardant (UL94 VTM-0 compliant)

Product Description

RTVDAS Aluminized Polyimide consists of a 6.5- mil

AeroZero® polyimide aerogel film with a 1-mil VDA

polyimide film bonded onto a single side using a 1-

mil adhesive. The opposite size has a 1-mil adhesive

layer for bonding to substrates. The adhesive is a

high-performance engineering grade silicone

pressure sensitive adhesive (PSA) with a release liner

that is peeled off before application. Potential

substrates include stainless steel, aluminum, glass,

and polymer substrates such as carbon fiber,

polyimides, polyether ketones, polyurethanes, and

polyesters. Typical use is thermal barrier/protection

of parts used in the Aerospace, Defense, Electronics

& Communications Equipment, and High-

Performance Racing industries.

Storage

Recommended storage conditions:

Temperature: below 25°C

(~77°F)

Relative Humidity: below 50%

Applications

Leading Edge thermal insulation protection for:

 Electronics and communications equipment

 Semi-conductors and medical devices

 High performance race cars and boats

 Rockets, supersonic munitions, and aircraft

Standard Dimensions

• Standard Roll: 1 in wide x 25 ft long

• Other sizes available upon request