| Electronic Components Datasheet Search |
|
MAALSS0025 Datasheet(PDF) 2 Page - Tyco Electronics |
|
|
|||||||||||||||||||||||||||||
MAALSS0025 Datasheet(HTML) 2 Page - Tyco Electronics |
|
2 / 4 page ![]() High Dynamic Range Low Noise Amplifier, 400 - 500 MHz MAALSS0025 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. V1 2 Electrical Specifications: TA = +25°C, Z0 = 50 Ohms, F = 450 MHz, Pin = -30 dBm Parameter Test Conditions Units Min Typ Max Gain 5 V, 60 mA4 dB 19 21 24 Noise Figure 5 V, 60 mA4 dB — 0.9 1.4 Input Return Loss — dB — 9 — Output Return Loss — dB — 11 — Output 1 dB Compression 5 V, 60 mA4 dBm — 16.5 — Output IP3 5 V, 60 mA4 dBm — 28 — Input IP3 5 V, 60 mA4 dBm 3 7 — Reverse Isolation — dB — 34 — 4. Using external 15-ohm resistor. See functional schematic. External Circuitry Parts List Part Value Purpose C1 100 pF DC Block C2 8 pF Input Matching C3 470 pF Bypass C4 4 pF Output Matching L1 22 nH Input Matching L2 43 nH Input Matching L3 12 nH RF Choke L4 11 nH Output Matching R1 15 Ohms Optional current control (see note 5) 5. Pin 2 allows use of an external resistor to ground for optional, higher current. For 20 mA operation, no resistor is used. For IDD ~ 40 mA, R2 = 43 ohms; IDD ~ 60 mA, R2 = 15 ohms; IDD ~ 80 mA, R2 = 10 ohms. Functional Schematic IN C1 OUT L1 C2 L2 R1 (See note 5) L3 V DD C3 L4 C4 3 2 7 6 1,4,5,8 Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |