Revision history

Table 10. Document revision history

Date

Revision

Changes

02-Jan-2002

1

Initial release.

20-Jun-2005

2

PPAP references inserted in the datasheet, see Table 9 on page 21.

ESD protection inserted in Table 1 on page 5.

10-Oct-2005

3

PPAP part numbers added in Table 9 on page 21.

12-Dec-2005

4

Pin connections identification added on cover page figure.

Thermal resistance junction to case information added see Table 1 on page 5.

01-Feb-2006

5

Maximum junction temperature parameter added in Table 1 on page 5.

02-May-2006

6

Minimum slew rate parameter in temperature Table 3 on page 7.

13-Jul-2006

7

Modified ESD values and added explanation on VCC, Vid in Table 1 on page 5. Added macromodel

information.

28-Feb-2007

8

Modified ESD/HBM values in Table 1 on page 5.

Updated MiniSO8 package information.

Added note relative to automotive grade level part numbers in Table 9 on page 21.

18-Jun-2007

9

Power dissipation value corrected in Table 1: Absolute maximum ratings.

Table 2: Operating conditions added.

Equivalent input noise voltage parameter added in Table 3.

Electrical characteristics curves updated. Figure 19: Phase margin vs capacitive load added.

Section 6: Package information updated.

18-Dec-2007

10

Removed power dissipation parameter from Table 1: Absolute maximum ratings.

Removed Vopp from electrical characteristics in Table 3.

Corrected MiniSO8 package mechanical data in Section 6.4: MiniSO8 package information.

08-Apr-2008

11

Added table of contents.

Corrected the scale of Figure 7 (mA not µA).

Corrected SO8 package information.

02-Jun-2009

12

Added input current information in Table 1: Absolute maximum ratings.

Added L1 parameters in Table 6: SO8 package mechanical data.

Added new order codes, LM2904AYD/DT, LM2904AYPT and LM2904AYST in Table 9: Order

codes.

13-Apr-2010

13

Added LM2904A on cover page.

Corrected footnote (5) in Table 1: Absolute maximum ratings.

Removed order code LM2904AYST from Table 9: Order codes.

24-Jan-2012

14

Removed macromodel from Chapter 5 (now available on www.st.com).

Added DFN8 2 x 2 mm package information in Chapter 6 and related order codes in Chapter 7.

Removed LM2904YD and LM2904AYD order codes from Table 9.

Changed note for LM2904YST order code in Table 9.

24-Jan-2014

15

Updated: marking info for LM2904AYPT, package silhouette drawings in the cover page, ΔVio/ΔT

and ΔIio/ΔT symbols in Table 3 on page 7

Added: ESD info in Features section and Section 2: Package pin connections

Removed: LM2904N from Table 9: Order codes.

02-Oct-2015

16

Figure 1: Schematic diagram (1/2 LM2904, LM2904A): updated

16-Feb-2016

17

Updated layout

LM2904, LM2904A, LM2904W, LM2904AW

DS0508 - Rev 20

page 23/28