Micronas

page 1 of 1

Subject:

Data Sheet Concerned:

Supplement:

Edition:

Data Sheet Supplement

Changes:

– position tolerance of the sensitive area reduced

– tolerances of the outline dimensions reduced

– thickness of the leadframe changed to 0.15 mm (old 0.125 mm)

– HAL 300 now available in SOT-89B

– SOT-89A will be discontinued in December 2000

Position of sensitive area

Note: A mechanical tolerance of

±0.05 mm applies to all dimensions where no tolerance is explicitly given.

Position tolerances of the sensitive areas are defined in the package diagram.

HAL 300

HAL 320

(2.05

±0.001) mm

(2.25

±0.001) mm

1.025 mm nominal

1.125 mm nominal

y

0.95 mm nominal

0.95 mm nominal

4.55

min.

0.25

2.55

0.4

0.4

1.7

0.4

1.5

3.0

0.15

branded side

SPGS0022-5-B3/1E

top view

y

12

3

2

0.3

1.15

∅ 0.2

∅ 0.2

Improvement of SOT-89B Package

HAL 300, 6251-345-1DS, Edition July 15, 1998

HAL 320, 6251-439-1DS, Edition July 15, 1998

No. 1/ 6251-532-1DSS

July 4, 2000

HAL 300, HAL 320