IL260 datasheet(5/10 Pages) ETC

5 / 10 page

IL260 IL261

Notes: (Apply to both 3.3 V and 5 V specifications.)

1. Absolute Maximum ambient operating temperature means the device will not be damaged if operated under these conditions. It

does not guarantee performance.

2. PWD is defined as | t

PHL– tPLH |. %PWD is equal to the PWD divided by the pulse width.

3. t

PSK is equal to the magnitude of the worst case difference in tPHL and/or tPLH that will be seen between units at 25°C.

4. CM

H is the maximum common mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD. CML is the

maximum common mode input voltage that can be sustained while maintaining V

O < 0.8 V. The common mode voltage slew

rates apply to both rising and falling common mode voltage edges.

5. Device is considered a two terminal device: pins 1-8 shorted and pins 9-16 shorted.

6. Dynamic power consumption numbers are calculated per channel and are supplied by the channel’s input side power supply.

IL260 Datasheet(PDF) 5 Page - List of Unclassifed Manufacturers