- 118 -

All Data Subject To Change Without Notice

www.andersonpower.com

SBE® 320 / SBX® 350 ACCESSORIES

Cable Clamps

Durable metal clamps adapt to a wide range of cable sizes. Cable

clamp kit includes clamp top and bottom as well as the hardware bag.

Cable Size

Min / Max

Min / Max

Description

Inches O.D.

mm O.D.

Part Number

Minimum Quantity

25

Cable Clamp Kit

0.85 to 0.67

21.6 to 17.1

911G2

Handles *

Handles are made out of durable PC plastic. Hardware

to attach to connector body included in kits.

Description

Part Numbers

Minimum Quantity

100

25

Gray Handle Kit

995G2-APP

995G2

Red Handle Kit

995G4-APP

995G4

Handle Only, Gray

3-5074P1

-

Handle Only, Red

3-5074P3

-

Handle Only, Black

3-5074P5

-

Hardware Bag

-

106G7

* Torque value 50 (in - lbs) / 5.6 (Nm)

NOTE: For assembly of clamps to housing only

Powerpole® Auxiliary

Powerpole® auxiliary connectors are rated up to 30 amps 600 volts and can be

used for auxiliary power, control or sensing. The auxiliary kit includes (1) each

black and red standard Powerpole® housing, (2) Contacts, (2) Zip Cable Straps,

and (2) Retaining Pins. (1) Retaining Clip can be substituted for (2) Retaining Pins.

Description

Part Numbers

Minimum Quantity

200

25

Powerpole® Auxiliary Kit 16 to 12 AWG Contact

-

6305G1

Powerpole® Auxiliary Kit 20 to 16 AWG Contact

-

6310G1

Black Powerpole® Housing

1327G6

-

Red Powerpole® Housing

1327

-

16 to 12 AWG Contact

1331

-

20 to 16 AWG Contact

1332

-

NOTE: Finger proof PP15/45 housings should not be used for auxiliary contacts.

1x4 Auxiliary Connector

The unique 1x4 auxiliary connector allows up to 4 auxiliary circuits up to 20 amps

150 volts each in SBE®, SBO®, & SBX® housings. The genderless design holds

two each of the gold plated pin & socket contacts. This innovation allows the very

durable and cost effective design of SBE®,O, X connectors to substitute for DIN

43589-1 applications where 4 auxiliary contacts are required. Multiple pin lengths

allow the further benefit of sequencing between circuits. (2) Retaining Pins or (1)

Retaining Clip is required to hold the auxiliary housing in place. Auxiliary Kits include

(1) Auxiliary Housing, (2) Standard Length Pin Contacts, (2) Socket Contacts, (2)

Retaining Pins and (1) Retaining Clip.

Description

AWG

mm²

Part Numbers

Minimum Quantity

1,000

250

25

1x4 Auxiliary Kit

12

4

-

-

440G3

1x4 Auxiliary Kit

16 to 14 1.5 to 2.5

-

-

440G1

1x4 Auxiliary Kit

20 to 16 0.75 to 1.5

-

-

440G2

1x4 Auxiliary Housing

Contacts Sold Separately

3-5956P1 444G1

-

The given wire O.D. information is an estimate. Cable clamps should be

evaluated for performance with the actual wire to be used.

[ 8.4 ]

0.33

[ 10.9 ]

0.43

[ 3.8 ]

0.15

[ 41.3 ]

1.62

Socket

Locations