Version 05.01.03

J-01

Dimensions are shown in mm (inch)

Dimensions subject to change

www.ittcannon.com

Hermetic; MIL-C-5015

BFH/TBFH

(Thru-Bulkhead Fitting) are hermetically

sealed versions of the BFR and TBF

receptacle connectors. They meet the

requirements of MIL-C-5015.

The TBFH-100 and TBFH-200 are jam nut

mounted with an O-ring for sealing against

the bulkhead. TBFH-100 will accommodate a

panel thickness of 4,75 (.187) through 7,92

(.312) and a TBFH-200 will accommodate a

longer overall length for a panel thickness of

9,52 (.375) through 19,05 (.750)

The square flange mounted TBFH-110 mates

with 3106 and 3108 plugs.

Applications:

selected layouts.

is achieved using individual glass beads.

However, DWV ratings are lower.

Performance Specifications

Air Leakage Rate

≤1 micron ft

Connector Durability

100 mating cycles min.

Contact Retention

500 psi min., considerably higher with individual glass seals

Contact Termination

Eyelet; PC Tail; Solder

Coupling

Threaded

DWV

Dependent upon contact cavity arrangement

Flange Type

Circular; Flangeless; Hex; Square

Insulation Resistance

5000 MΩ min. at 500 V dc

Number of Circuits

Up to 75

Operating Temperature

–54°C to 150°C (–65°F to 302°F) for standard finishes

Service Class

Hermetically Sealed

Shell Style

Bulkhead

Thru-Bulkhead, Jam Nut Mounting

Thru-Bulkhead, Square Flange

Wire Accommodation

Up to #0 AWG, dependent upon contact cavity arrangement

Electrical Service Data

Contact Size

16

12

8

4

0

Current Rating (max.)

✧

10 A

17 A

33 A

60 A

100 A

Contact Resistance (max.)

12.50 mΩ

7.40 mΩ

4.00 mΩ

2.10 mΩ

1.25 mΩ

Materials and Finishes

Description

Material

Finish

Shell

Steel

Insulator

High Grade Plastic

—

Contact

Steel

O-Ring

Nitrile per AN6227

—

Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs

✧ This is the maximum current for one single contact. Using MIL-W-5088 and current carried by all contacts within the connector, heat rise can be predicted.

The heat rise must not cause the connector temperature range to be exceeded.

# Additional finishes for high temperature and special applications are available.

Receptacles with a maximum air leakage rate of .01 micron cubic foot per hour are also available.

Product Features

For more information: www.ittcannon.com/cat280