Nexperia

BAT86

Schottky barrier single diode

BAT86

All information provided in this document is subject to legal disclaimers.

©

Nexperia B.V. 2012. All rights reserved

Product data sheet

25 July 2012

6 / 8

11. Legal information

11.1 Data sheet status

Document

status [1][2]

Product

status [3]

Definition

Objective

[short] data

sheet

Development This document contains data from

the objective specification for product

development.

Preliminary

[short] data

sheet

Qualification This document contains data from the

preliminary specification.

Product

[short] data

sheet

Production

This document contains the product

specification.

[1]

Please consult the most recently issued document before initiating or

completing a design.

[2]

The term 'short data sheet' is explained in section "Definitions".

[3]

The product status of device(s) described in this document may have

changed since this document was published and may differ in case of

multiple devices. The latest product status information is available on

the Internet at URL http://www.

nexperia.com.

11.2 Definitions

Preview — The document is a preview version only. The document is still

subject to formal approval, which may result in modifications or additions.

Nexperia does not give any representations or warranties as to the accuracy

or completeness of information included herein and shall have no liability for

the consequences of use of such information.

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions.

Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the

relevant full data sheet, which is available on request via the local

Nexperia

sales office. In case of any inconsistency or conflict with the short data

sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the

Nexperia product

is deemed to offer functions and qualities beyond those described in the

Product data sheet.

11.3 Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However,

Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information.

Nexperia takes no responsibility

for the content in this document if provided by an information source

outside of

Nexperia.

In no event shall

Nexperia be liable for any indirect, incidental, punitive,

special or consequential damages (including - without limitation -lost profits,

lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever,

Nexperia' s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of

Nexperia.

Right to make changes — Nexperia reserves the right to make changes to

information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction of an

Nexperia product can reasonably be expected to result in personal injury,

death or severe property or environmental damage.

Nexperia and its

suppliers accept no liability for inclusion and/or use of

Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only.

Nexperia makes no representation

or warranty that such applications will be suitable for the specified use without

further testing or modification.

Customers are responsible for the design and operation of their applications

and products using

Nexperia products, and Nexperia accepts no liability for

any assistance with applications or customer product design. It is customer’s

sole responsibility to determine whether the

Nexperia product is suitable and

fit for the customer’s applications and products planned, as well as for the

planned application and use of customer’s third party customer(s). Customers

should provide appropriate design and operating safeguards to minimize the

risks associated with their applications and products.

Nexperia does not accept any liability related to any default, damage, costs or

problem which is based on any weakness or default

in the customer’s applications or products, or the application or use by

customer’s third party customer(s). Customer is responsible for doing all

necessary testing for the customer’s applications and products using

Nexperia products in order to avoid a default of the applications

and the products or of the application or use by customer’s third party

customer(s).

Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are sold

subject to the general terms and conditions of commercial sale, as published

at http://www.

nexperia.com/profile/terms, unless otherwise agreed in a valid

written individual agreement. In case an individual agreement is concluded

only the terms and conditions of the respective agreement shall apply.

Nexperia hereby expressly objects to applying the customer’s general terms

and conditions with regard to the purchase of

Nexperia products by customer.

No offer to sell or license — Nothing in this document may be interpreted or

construed as an offer to sell products that is open for acceptance or the