MB203LCD

16 x 2 LCD Character Display Module

for the MB203 module board

a precision +/- 5½-digit Digital Voltmeter (DVM) printed circuit board that contains the

ALD500R/ALD523D A/D Converter – Display Module Controller chipset. The MB203LCD has built-in

Character ROM, display driver and column driver, a 6-inch cable and a 14-pin connector that plugs into

the side of the MB203 board. It draws its power directly from theMB203 module board so that a separate

power supply source is not required.

The MB203LCD, together with the MB203 and a standard +5 V DC power supply source, makes a

complete high resolution, high precision Digital Panel Meter. For a complete list of characters available,

please see publication DVM523, ALD523D Setup and Calibration Software User Guide, page 15.

Key Features

• 16 Characters with 2 lines display

• Over 200 character fonts available

• High Display resolution: 5 x 8 dots per character

• Display with driver mounted on a single printed circuit board

• Standard CMOS Logic compatible

• 6 inch cable with 14-pin connector that plugs directly into the MB203 Module Board

• Displays Multiple Display Sets with the MB203 Module Board

• Easy to program with the MB203 Module Board software and a standard PC

Key Specifications

• Power Supply: +4.5 V to +5.5V max @ 5mA max.

• High-Level Input Voltage= 2.2 V to Vcc

• Low-Level Input Voltage: 0.0 V to 0.6 V

• Operating Temperature Range: 0 to 50 degrees C.

• Font size: 4.35 mm x 2.95 mm

• Overall dimension: 80.0 mm (width) x 36.0 mm (height) x 11.0 mm (depth)

MB203LCD

©

©

©

© 2002 Advanced Linear Devices, Inc., 415 Tasman Drive, Sunnyvale, California 94089-1706, Tel: (408) 747-1155,

Fax: (408) 747-1286

http://www.aldinc.com

1 of 1