SIP series preamplifiers datasheet

P a g e | 1

18/03/2021

VIGO System S.A. reserves the right to change these specifications at any time without notification.

www.vigo.com.pl

SIP series

SIP is a series of ultra-small transimpedance, AC or DC coupled

preamplifiers. It is designed to operate with either biased or

non-biased detectors. It is compatible with uncooled detectors in

TO39 package (SIP-TO39) or thermoelectrically cooled detectors in

TO8 package (SIP-TO8). SIP is dedicated for OEM applications and

requires external heatsink (MHS-2). There is a possibility to adjust

gain (devices with a frequency bandwidth up to 100 MHz).

Features



Very small size



Frequency bandwidth up to 250 MHz



Adjustable gain as an option

SIP-TO8

SIP-TO39

Specification (Ta = 20°C)

Parameter

Typical value

Conditions, remarks

Low cut-off frequency flo, Hz

DC, 10, 100, 1k, 10k

High cut-off frequency fhi, Hz

100k, 1M, 10M, 100M, 250M

Transimpedance Ki, V/A

up to 100k

tunable

Transimpedance range Ki max/Ki min

up to 5

dependent on fhi

Output impedance Rout, Ω

50

Output voltage swing Vout, V

±10

±2

±1

fhi ≤ 1 MHz, RL = 1 MΩ*)

1 MHz < fhi ≤ 10 MHz, RL = 1 MΩ*)

10 MHz < fhi ≤ 250 MHz, RL = 50 Ω*)

Output voltage offset Voff, mV

max ±20**)

Power supply voltage Vsup, V

±15

±9

fhi ≤ 1 MHz

fhi > 1 MHz

Power supply current Isup, mA

max ±50

no detector biasing

Ambient operating temperature Ta, °C

10 to 30

Signal output socket

MMCX

Power supply and TEC control socket

AMP2×4 (male)

AMPMODU 2×4

Mounting hole

none

Fan

no

external heatsink necessary

*) RL – load resistance

**) Measured with equivalent resistor at the input instead of the detector, it is to avoid the environmental thermal radiation impact.

Types of VIGO detectors that can be integrated

with SIP-TO8 preamplifier



Photoconductive

PC-2TE, PC-3TE, PC-4TE



Phtoconductive optically immersed

PCI-2TE, PCI-3TE, PCI-4TE



Photovoltaic

PV-2TE, PVA-2TE, PV-3TE, PV-4TE



Photovoltaic optically immersed

PVI-2TE, PVIA-2TE, PVI-3TE, PVI-4TE



Photovoltaic multiple junction

PVM-2TE



Photovoltaic multiple junction optically immersed

PVMI-2TE, PVMI-3TE, PVMI-4TE

Types of VIGO detectors that can be

integrated with SIP-TO39 preamplifier



Photoconductive

PC



Phtoconductive optically immersed

PCI



Photovoltaic

PV, PVA



Photovoltaic optically immersed

PVI, PVIA



Photovoltaic multiple junction

PVM



Photovoltaic multiple junction optically

immersed

PVMI

Code description

Type

flo, Hz

fhi, Hz

Detector

package

Gain adjustment

SIP –

DC

10

100

1k

10k

–

100k

1M

10M

100M

250M

–

TO8

TO39

–

G*)

(with gain adjustment)

NG

(without gain adjustment)

*) Only for SIP preamplifier with fhi ≤ 100 MHz.