MC68340 datasheet(224/441 Pages) FREESCALE

224 / 441 page

MOTOROLA

MC68340 USER’S MANUAL

5- 87

5.6.2.8.16 Future Commands. Unassigned command opcodes are reserved by Motorola

for future expansion. All unused formats within any revision level will perform a NOP and

return the ILLEGAL command response.

5.6.3 Deterministic Opcode Tracking

The CPU32 utilizes deterministic opcode tracking to trace program execution. Two

signals,

IPIPE and IFETCH, provide all information required to analyze instruction pipeline

operation.

5.6.3.1 INSTRUCTION FETCH (

IFETCH). IFETCH indicates which bus cycles are

accessing data to fill the instruction pipeline.

IFETCH is pulse-width modulated to

multiplex two indications on a single pin. Asserted for a single clock cycle,

IFETCH

indicates that the data from the current bus cycle is to be routed to the instruction pipeline.

IFETCH held low for two clock cycles indicates that the instruction pipeline has been

flushed. The data from the bus cycle is used to begin filling the empty pipeline. Both user

and supervisor mode fetches are signaled by

IFETCH.

Proper tracking of bus cycles via

IFETCH on a fast bus requires a simple state machine.

On a two-clock bus,

IFETCH may signal a pipeline flush with associated prefetch followed

immediately by a second prefetch. That is,

IFETCH remains asserted for three clocks, two

clocks indicating the flush/fetch and a third clock signaling the second fetch. These two

operations are easily discerned if the tracking logic samples

IFETCH on the two rising

edges of CLKOUT, which follow the

AS (DS during show cycles) falling edge. Three-clock

and slower bus cycles allow time for negation of the signal between consecutive

indications and do not experience this operation.

5.6.3.2 INSTRUCTION PIPE (

IPIPE). The internal instruction pipeline can be modeled as

a three-stage FIFO (see Figure 5-28). Stage A is an input buffer—data can be used out of

stages B and C.

IPIPE signals advances of instructions in the pipeline.

Instruction register A (IRA) holds incoming words as they are prefetched. No decoding

takes place in the buffer. Instruction register B (IRB) provides initial decoding of the

opcode and decoding of extension words; it is a source of immediate data. Instruction

DATA

BUS

EXTENSION

WORDS

OPCODES

RESIDUAL

Figure 5-28. Functional Model of Instruction Pipeline

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MC68340 Datasheet(PDF) 224 Page - Freescale Semiconductor, Inc

MC68340 Datasheet(HTML) 224 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL