74ALVC573

Octal D-type transparent latch; 3-state

Rev. 4 — 30 April 2021

Product data sheet

1. General description

The 74ALVC573 is an octal D-type transparent latch featuring separate D-type inputs for each latch

and 3-state true outputs for bus-oriented applications. A latch enable (LE) input and an outputs

enable (OE) input are common to all latches.

When pin LE is HIGH, data at the D-inputs (pins D0 to D7) enters the latches. In this condition,

the latches are transparent, that is, a latch output will change each time its corresponding D-input

changes. When pin LE is LOW, the latches store the information that was present at the D-inputs

one set-up time preceding the HIGH-to-LOW transition of pin LE.

When pin OE is LOW, the contents of the eight latches are available at the Q-outputs (pins Q0 to

Q7). When pin OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of input pin

OE does not affect the state of the latches.

The 74ALVC573 is functionally identical to the 74ALVC373, but has a different pin arrangement.

2. Features and benefits

• Wide supply voltage range from 1.65 V to 3.6 V

• 3.6 V tolerant inputs/outputs

• CMOS low power consumption

• Direct interface with TTL levels (2.7 V to 3.6 V)

• Power-down mode

• Latch-up performance exceeds 250 mA

• Complies with JEDEC standards:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8B (2.7 V to 3.6 V)

• ESD protection:

• HBM JESD22-A114E exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V