Absolute maximum ratings and operating conditions

LM2904W

4/19

2

Absolute maximum ratings and operating conditions

Table 1.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

Supply voltage

+32

V

Differential input voltage

V

Input voltage

V

1.

from simultaneous short-circuits on all amplifiers.

Infinite

s

Power dissipation

500

mW

2.

This input current only exists when the voltage at any of the input leads is driven negative. It is due to the

collector-base junction of the input PNP transistor becoming forward biased and thereby acting as input

diode clamps. In addition to this diode action, there is also NPN parasitic action on the IC chip. This

for a large overdrive) for the time during which an input is driven negative. This is not destructive and

normal output is restored for input voltages above -0.3V.

50

mA

Operating free-air temperature range

-40 to +125

°C

Storage temperature range

-65 to +150

°C

SO-8

TSSOP8

DIP-8

3.

Short-circuits can cause excessive heating and destructive dissipation.

4.

125

120

85

°C/W

Thermal resistance junction to case

SO-8

TSSOP8

DIP-8

40

37

41

°C/W

Storage temperature range

-65 to +150

°C

ESD

5.

Human body model: 100pF discharged through a 1.5k

Ω resistor between two pins of the device, done for

all couples of pin combinations with other pins floating.

2kV

6.

Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins

of the device with no external series resistor (internal resistor < 5

Ω), done for all couples of pin

combinations with other pins floating.

200

V

7.

Charged device model: all pins plus package are charged together to the specified voltage and then

discharged directly to the ground.

1.5

kV