USB5807C datasheet(18/56 Pages) MICROCHIP

18 / 56 page

USB5807C

DS00003182B-page 18



2019 - 2021 Microchip Technology Inc.

3.4

Buffer Type Descriptions

TABLE 3-10: USB5807 BUFFER TYPE DESCRIPTIONS

BUFFER

DESCRIPTION

Input.

Input with Schmitt trigger.

O12

Output buffer with 12 mA sink and 12 mA source.

OD12

Open-drain output with 12 mA sink

50 μA (typical) internal pull-up. Unless otherwise noted in the pin description, internal

pull-ups are always enabled.

Internal pull-up resistors prevent unconnected inputs from floating. Do not rely on

internal resistors to drive signals external to the device. When connected to a load that

must be pulled high, an external resistor must be added.

50 μA (typical) internal pull-down. Unless otherwise noted in the pin description,

internal pull-downs are always enabled.

Internal pull-down resistors prevent unconnected inputs from floating. Do not rely on

internal resistors to drive signals external to the device. When connected to a load that

must be pulled low, an external resistor must be added.

ICLK

Crystal oscillator input pin

OCLK

Crystal oscillator output pin

I/O-U

Analog input/output defined in USB specification.

I-R

RBIAS.

Note:

Refer to Section 10.5, DC Specifications for individual buffer DC electrical characteristics.

USB5807C Datasheet(PDF) 18 Page - Microchip Technology