Liquiline Mobile CML18

4

Endress+Hauser

• Sensor can be calibrated in a lab, thus increasing the availability of the measuring point in the

process

• Intrinsically safe electronics mean operation in hazardous areas is not a problem.

• Predictive maintenance thanks to recording of sensor data, e.g.:

• Total hours of operation

• Hours of operation with very high or very low measured values

• Hours of operation at high temperatures

• Number of steam sterilizations

• Sensor condition

Input

Input power

Wireless charging

5 W

M12 connection

5 V; 0.6 A

Measured variables

• pH

• ORP

• pH/ORP

• Oxygen

• Conductivity

• Temperature

Measuring range

→ Documentation of the connected sensor

Type of input

Memosens connection for sensors with Memosens technology

M12 connection for digital measuring cable CYK10, CYK20 for sensors with Memosens technology

Memosens sensors CLS50D and CLS54D

A complete list of supported sensors can be found on the product page of the device:

www.endress.com/CML18

Output

Output signal

Memosens M12 (maximum 80 mA)

Power supply

Supply voltage

Inductive charging: use Qi-certified devices (min. 5 W output power)

Battery rated capacity

1000 mAh (min. 950 mAh)

Battery life

Max. 48 h

Overvoltage protection

IEC 61 000-4-4 with 0.6 kV

IEC 61 000-4-5 with 2.0 kV

Sensor connection

Sensors with Memosens technology

Cable specification

Digital measuring cable CYK10-Axx2+x

Digital measuring cable CYK20-AAxxC1