Wind Measurer Alarm Controller PCE-WSAC 50

PCE-WSAC 50 Wind Measurer Alarm Controller

Pre-alarm and full alarm / Optional RS-485 modbus interface / Displays current wind speed and average wind speed of last 2 and 5

minutes

PCE-WSAC 50 is a wind measurer alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5

minutes. A pre-alarm and full alarm can be activated based on preset values. If wind speeds are higher than the preset values, a pre-alarm is

first applied before the full alarm is issued. Both alarms are delivered visually and audibly. If the pre-alarm is triggered, a yellow LED will flash

on the front of the unit and a beep will periodically be emitted as a warning tone. If the full alarm is triggered, a red LED will flash on the front

of the unit and a beep will continuously be emitted.

PCE-WSAC 50 allows measurement of the slightest of wind movements. This wind measurer alarm controller is used for a variety of wind

monitoring applications in industries such as construction, mining, renewable energy and manufacturing. If necessary, a relay can also be

connected to the controller.

***Sensors sold separately***

Pre-alarm and full alarm with visual and audible warnings

Allows measurement of the slightest wind movements

Optional RS-485 modbus interface for data communication

Bright, easy-to-read LED display

Simple to use

Incl. ISO Calibration Certificate

***Sensors sold separately***