PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

info@pce-americas.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

info@pce-instruments.com

www.pce-instruments.com/english

www.pce-instruments.com

Technical Conductivity Tester PCE-COM 20

PCE-COM 20 Conductivity Tester for Metals

Large measuring range up to 112% IACS or 65 MS/m with lift-off and temperature

compensation, memory, PC-compatible software, factory calibration certificate and 60 kHz

operating frequency

PCE-COM 20 is a portable handheld non-destructive conductivity tester for metals. This non-destructive

testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals

such as aluminum and copper.

Featuring an operating frequency of 60 kHz, the conductivity meter has a large measuring range of 0.51

... 112% IACS with an accuracy of +/- 0.5% at 20 ° C / 68 ° F. Thanks to a resolution of up to 0.01%

IACS, automatic temperature compensation (ATC) and lift-off compensation (up to 500 μm), the device

ensures quick, easy, accurate and reproducible measurements of coated or corroded pieces during

changing ambient conditions.

Measurement of the electrical conductivity of non-ferrous metals, such as aluminum, copper, titanium,

magnesium or bronze, is necessary in applications involving electrical conductors and the

characterization of alloys. Typical application areas are the assessment of strength differences in heat-

treated or hardened materials, the authenticity testing of coin alloys, the verification of alloy

inhomogeneities in critical components and the sorting of materials.

The conductivity meter is powered by an internal battery that can be charged via the interface on the

bottom of the unit. In addition to the connection for the charging adapter, there is a USB interface

allowing for the transfer of measurement data to a PC for more detailed analysis.

- Eddy current measuring principle

- For non-ferrous metals and alloys

- Non-destructive testing (NDT)

- 60 khZ operating frequency

- Large measuring range up to 112% IACS or 65 MS/m

- Memory for up to 500 groups of measurements

- Automatic temperature compensation (ATC)

- Lift-off compensation up to 500 μm

- Automatic calibration

- Adjustable backlighting