Conductivity Meter PCE-PWT 10

Conductivity Meter PCE-PWT 10

pocket size conductivity tester / for ultrapure water / 

smallest measuring range 20µS/cm / salinity measurement / temperaturecompensation up to 60 °C

The conductivity meter is a good solution for anyone who wants to check the conductivity of ultrapure water.This conductivity tester is a

compact device with an integrated temperature sensor for optimum temperature compensation.Among other things, the conductivity tester

has a very low measuring range of only 0 ... 20 μS / cm.

Furthermore, the cunductivity meter is able to accurately determine the salinity of liquids.The PCE-PWT 10  conductivity tester has an automatic

temperature compensation in the range of 0 ... 60 ° C.The calibration of the conductivity tester is carried out via a three-point calibration.

For the desalting stage of water purification the pure water tester PCE-PWT 10 is helpfull. Separation of salt is a necessary process and can be

monitored by pure water tester. The latter are a part of both, electrodialysis and reverse osmosis. Though, the purpose is the same, the

principle of these process is different. Reverse osmosis is a successor of electrodialysis and if the latter uses electrical current, the former is

based on pressure. For desalting of water also forward osmosis may be applied, which helps to separate the dissolved solutes from the pure

water. Both methods are aimed at improving the pure water quality. This quality can be checked in the end by the pure water tester.

Conductivity is a material-specific ability to conduct electrical current. The electrolytic conductivity of aqueous solutions depends on

concentration of water constituents, their degree of dissociation and the valency of the cations and anions as well as the mobility of these ions,

which in turn is influenced by the temperature. Our pure water tester can accurately determine the ion content. In wastewater, the conductivity

is considered as a sum parameter for the ion concentration and thus for the total salinity. With the help of our pure water tester it is possible to

make a quick and easy statement about the total content of dissolved salts in the water.

 

smallest measuring range up to 20 µS/cm

compact design of pure water tester housing

automatic temperature compensation by pure water tester

salinity measurement

internal three-point conductivity calibration

changeable conductivity electrode