TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com

2|3

Technical data

Wire breakage/Reverse polarity protection yes / Complete

Output function

3-wire, NO contact, PNP

Switching frequency

0.03 kHz

Mechanical data

 

Design

Smooth barrel, 12.7 mm

Probe length

115.9  mm, probe length x

Housing material

Metal, 1.4305 (AISI 303)

Active area material

Plastic, PA12-GF30

Connector housing

metal, GdZn, chromated

Tightening torque fixing screw

7.3 Nm

Electrical connection

Connector, M12 × 1

Environmental conditions

 

Ambient temperature

-25…+70  °C

Vibration resistance

55 Hz (1 mm)

Shock resistance

30  g (11 ms)

Protection class

IP67

Power-on indication

LED, Green

Switching state

LED, Yellow

Included in delivery

2 x socket head screw 1/4"-20 NPT, 5/8"

long

Pressure-resistant inductive sensors withstand

high pressures which makes them perfectly

suited for position control in hydraulic cylinders.

Mounting instructions

Mounting instructions/Description

Distance D

2 x B

Distance W

3 x Sn

Distance T

3 x B

Distance S

1.5 x B

Distance G

6 x Sn

Diameter active

area B

Ø 12.7 mm

The mounting receptacle and the O-ring

supplied with the sensor are approved for high

static and dynamic pressure. To ensure that the

application is pressure-resistant, the mounting

surface must also be designed accordingly.

Ensure that the mounting surface is dry and free

of dust during installation. Please also consider

that oil can be displaced from the hydraulic

system when the sensor probe is introduced,

in which case the mounting surface will be

moistened. Should this occur, a proper seal will

not be established.

 

Recommended clearances: