ferrule with plastic sleeve

Stripping length

6 mm

Tightening torque

0.5 Nm ... 0.6 Nm

Mounting

Mounting type

Wave soldering

Pin layout

Linear pinning

Drive form screw head

Slotted (L)

Drive form screw head

Slotted (L)

Material specifications

Material data - contact

Note

WEEE/RoHS-compliant, free of whiskers according to IEC

60068-2-82/JEDEC JESD 201

Contact material

Cu alloy

Surface characteristics

Tin-plated

Metal surface terminal point (top layer)

Tin (5 - 7 µm Sn)

Metal surface terminal point (middle layer)

Nickel (2 - 3 µm Ni)

Metal surface soldering area (top layer)

Tin (5 - 7 µm Sn)

Metal surface soldering area (middle layer)

Nickel (2 - 3 µm Ni)

Material data - housing

Color (Housing)

green (6021)

Insulating material

PA

Insulating material group

I

CTI according to IEC 60112

600

Flammability rating according to UL 94

V0

Glow wire flammability index GWFI according to EN 60695-2-12

850

Glow wire ignition temperature GWIT according to EN 60695-2-

13

775

Temperature for the ball pressure test according to EN 60695-

10-2

125 °C

Notes

Note on application

For safe conductor connection, always adhere to a defined

tightening torque. Particularly in the case of PCB terminal blocks

with two or three positions, the individual solder pin for each

contact point cannot compensate for this. That is why the

terminal blocks must be supported during conductor connection

(held with one hand, support on the housing).

Dimensions

GMKDSN 1,5/11-7,62 - PCB terminal block

1707124

https://www.phoenixcontact.com/us/products/1707124

Mar 11, 2024, 5:58 AM

Page 3 (11)