Type 0331

17 | 23

Visit product website 

8.

Product accessories

8.1. Accessory standard version

Option

Variable Code

Description

Impulse version

CF02

Bistable magnetic system with inrush and drop-off coil; continuous operation or

operation with short current pulses (min. 150 ms) possible

Oxygen versions

NL02

Suitable for applications with oxygen (non-metal materials that are in contact

with the medium, are tested and approved according to BAM)

Increased purity requirements e.g. oil,

grease and silicone-free

NL50/

NL05

Wetted parts are specially cleaned and packaged in accordance with the valves

Increased tightness requirements

PCxx

Standard units are tested at 10-2 mbar x l/sec; feasible up to 10-6 mbar

Electrical feedback

LF02/

LF03

See Type 1060 . Function as opener, closer or toggle switch depending on the

connection (no IP65 achievable)

High-power electronics

CZ05

Inrush power 60 W, nominal holding current 3 W; with plastic versions 100 %

duty cycle is now feasible

Vacuum version

NA02

Suitable for vacuums up to - 14 psi

Increased purity and tightness

requirements

NA03

Wetted parts are specially cleaned and leak tested to 10-4 mbar x l/sec

Increased purity and tightness

requirements and vacuum version

NA01

Wetted parts are specially cleaned and leak tested up to

10-4 mbar x l/sec and suited for vacuum up to - 14 psi

Coil with reduced power (5 W)

–

Devices have lower pressure range; with plastic versions 100 % duty cycle is

now feasible

Cable plug

JHxx/

JGxx/

JFxx

Cable plug is part of the delivery.

Cable plug versions (according to DIN EN 175301 - 803 form A),

see data sheet Type 2518  and Type 2509 

Manifold with banjo bolt

LG09

Due to the banjo bolt a direct attachment is possible

(for example, to externally controlled pneumatic drives)

Approvals

PD01

CSA General Purpose valve

PD02

UR (UL Recognized)/CSA approval

PD07

DNV-GL (formerly Germanischer Lloyd)

PR05

cFMus approved coil

Class I, Division 1, Groups A, B, C and D - T4

Class II, Division 1, Groups E, F and G - T4

Class III, Division 1 - T4

Class I, Zone 1, AEx mb IIC T4 Gb, Zone 21 AEx mb IIIC T130 °C Db

Ex mb IIC T4 Gb; Ex mb IIIC T130 °C Db

PE95

UL (UL Listed) approval

PU15

UL Listed for Hazardous Locations for USA and Canada, Class I,

Zone 1, AEx eb mb IIC T4; Zone 21, AEx mb tb IIIC T130 °C / Class I, Div 2,

Group A,B,C,D; Class II+III, Div 2, Group F,G

PX41

EPS 16 ATEX 1111 X/IECEx EPS 16.0049X, 2G T4 IIC/2D T130 °C IIIC,

Tamb - 40 °C…+ 60 °C, single and block mounting

Possible conformities

(depending on the assembly)

–

EAC, drinking water, FDA