Type 8031

4 | 8

Visit product website 

2.

Approvals and conformities

2.1. Conformity

In accordance with the Declaration of Conformity, the product is compliant with the EU Directives.

2.2. Standards

The applied standards which are used to demonstrate compliance with the EU Directives are listed in the EU-Type Examination Certificate

and/or the EU Declaration of Conformity.

2.3. Pressure Equipment Directive (PED)

The device conforms to article 4, paragraph 1 of the Pressure Equipment Directive (PED) 2014/68/EU under the following conditions:

Device used on a pipe

Note:

• The data in the table is independent of the chemical compatibility of the material and the fluid.

• PS = maximum admissible pressure (in bar), DN = nominal diameter of the pipe

Type of fluid

Conditions

Fluid group 1, article 4, paragraph 1.c.i

DN ≤ 25

Fluid group 2, article 4, paragraph 1.c.i

DN ≤ 32 or PS*DN ≤ 1000

Fluid group 1, article 4, paragraph 1.c.ii

DN ≤ 25 or PS*DN ≤ 2000

Fluid group 2, article 4, paragraph 1.c.ii

DN ≤ 200 or PS ≤ 10 or PS*DN ≤ 5000

3.

Materials

3.1. Bürkert resistApp

Bürkert resistApp – Chemical resistance chart

You want to ensure the reliability and durability of the materials in your individual application

case? Verify your combination of media and materials on our website or in our resistApp.

Start chemical resistance check