Visit product website 

DATA SHEET

Type 2030



Pneumatically operated

2/2-way diaphragm valve

CLASSIC with plastic

valve body

Type 2301



Pneumatically operated

2-way Globe Control

Valve

Type 8802



ELEMENT continuous

control valve systems -

overview

Type 8644



AirLINE SP electropneu-

matic automation system

Standard | EU | en | 2023-12-19 | 24

Magnetic inductive Insertion flowmeter

• Sensor without moving parts

• Indicates both flow rate and volume

• Simulation of all output signals

• Clean in place (CIP), FDA-compliant materials

• Version with Alloy C22 electrodes

The electromagnetic flowmeter Type 8045 is made up of an electronic module

including a backlit display, operating keys and a sensor consisting of PVDF or

stainless steel material. It has been designed to measure a flow rate of neutral and

slightly aggressive fluids with a conductivity of more than 20 µS/cm in DN 06…

DN 400 pipes.

The Type 8045 is equipped with a 4…20 mA output, a digital output (pulse output

by default). Some versions are equipped with two relay outputs and one digital

input. Two independent totalizers allow counting the flow rate.

This flowmeter is available either with a G 2" connection with a PVDF sensor or, a

G 2" or clamp connection with a stainless steel sensor which are designed for use

with an Insertion fitting Type S020.

The version with a stainless steel sensor can be used in applications with higher

pressures (PN 16) and higher temperatures (110 °C). The version with Alloy C22

electrodes has been designed for applications with aggressive fluids (chemicals)

and especially sea water applications.

Product variants described in the data sheet may differ from the product presentation and description.

Type description

Can be combined with

Type 8045

© Christian Bürkert GmbH & Co. KG, Subject to alteration