Type 8653

3 | 14

Visit product website 

1.

General technical data

Product properties

Dimensions

Further information can be found in chapter “5. Dimensions” on page 6.

Material

Body

PPA

Seal

NBR and PUR

Maximum installation width of a valve

island

48.6 mm. Further information can be found in chapter “5. Dimensions” on page 6.

Width per station

11 mm

Manual override

Latching, spring return (optional: lockable)

Number of valve positions

Max. 4

Maximum number of valve functions

Max. 8

Switching function/Operating principle

Further information can be found in chapter “2. Circuit functions” on page 4.

Pneumatic intermediate supply

N/A

Performance data

Pressure data

Overpressure to atmospheric pressure

Pressure range

Vac.…8 bar

External supply air (auxiliary pilot air)

3…8 bar

Flow rate Q

Nn value air

310 l/min 1.) measured at + 20 °C, 6 bar pressure at valve inlet and 1 bar differential pressure

Flow rate Q

Nn value air with integrated

P shut-off

N/A

Nominal operating mode

Continuous operation (100 % duty cycle)

Switching time

Measured according to ISO 12238

Electrical data

Operating voltage

24 V DC

Voltage tolerance

± 10 %

Residual ripple (at DC)

1 Vss

Nominal power of each valve

0.7 W (0.1 W after power reduction)

Nominal current of each valve

29 mA (10 mA after power reduction)

Position feedback

Possible via 8-DI module Type ME44 or 16-DI module Type ME6

Protection class

III according to DIN EN 61140, VDE 0140

Total current

With fieldbus connection

Current consumption < 400 mA

Medium data

Operating medium

Oil-free or lubricated compressed dry air, neutral gases (5 μm filter recommended)

Compressed air quality

ISO 8573 - 1:2010, Class 7.4.4

Approvals and conformities

Degree of protection

IP65, IP67

North America (USA/Canada)

Further information can be found in chapter “3.4. North America (USA/Canada)” on page 5.

Process/Port connection & communication

Working port

D 6, D ¼

Air supply connection

D 8, D 5/16

Communication module

ME43 or ME63 (Gateway)

Communication interface

PROFIBUS DP

Industrial Ethernet (PROFINET IO, EtherNet/IP, Modbus TCP, EtherCAT,

CC-Link IE Field Basic)

CANopen

büS (for networking with Bürkert devices)

Environment and installation

Installation position

Any

Storage temperature

- 10…+ 60 °C

Ambient temperature

- 10…+ 55 °C

Accessories

Bürkert Software 2.)

Software Bürkert Communicator

Further information can be found in chapter “8.1. Bürkert Communicator Software” on page

8.

1.) The maximum flow rate depends on the valve function.

2.) For commissioning, the Bürkert Communicator software Type 8920  as well as the associated USB büS interface set 1 with Article no. 772426  are required.