Visit product website 

DATA SHEET

Type 8805



Ball valve / Butterfly valve

with pneumatic rotary

actuator

Type 8202



pH or redox potential

transmitter, ELEMENT

design

Type 8045



Magnetic inductive

Insertion flowmeter

Type 8798



Remote sensor for

pneumatically actuated

process valves

Type 2301



Pneumatically operated

2-way Globe Control

Valve

Type 2300



Pneumatically operated

2-way angle seat control

valve ELEMENT

Type 2103



2/2-way diaphragm valve

with pneumatic stainless

steel actuator (Type ELE-

MENT) for decentralised

automation

Type 8619



multiCELL – Multi-

channel and multi-func-

tion transmitter/controller

Standard | EU | en | 2024 - 03 - 07 | 30

Digital electropneumatic Process Controller SideControl

• Compact and robust design

• Start-up via the TUNE function of the positioner and process controller

• Integrated diagnostic functions for valve monitoring

• Dynamic actuating system with no air consumption in controlled state

• EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1 or

Bürkert system bus (büS)

The device Type 8793 digital process controller is designed with standardisation

according to IEC 60534 - 6 - 1 or VDI/VDE 3845 (IEC 60534 - 6 - 2) for assembly to

linear and rotary actuators. The variant with remote position sensor can also be

used to control Bürkert process control valves. The process controller processes

all standard current and voltage signals and can also be equipped with the fieldbus

interface. The actual process value is supplied directly to the device as 4 - 20 mA,

PT100 or as a frequency signal. The process controller calculates the position

setpoint for the subordinated positioner via variance comparison. The parameteri-

sation of process and position controllers can be carried out automatically via the

Tune function. Operation is simple via the graphical display with keypad or via

Bürkert Communicator. The process controller is equipped with diagnostic func-

tions to monitor the valve. The diagnostics can be used to monitor the operating

conditions of the control valve which makes maintenance decisions predictable

and optimises the availability of the plants as required. The pneumatic actuating

system can be used equally for single-acting and double-acting actuators. It is

characterised by a defined safety response in the event of the failure of the electri-

cal or pneumatic auxiliary power and possesses an enormous air capacity range

with pressure supply up to 7 bar.

Product variants described in the data sheet may differ from the product presentation and description.

Type description

Can be combined with

Type 8793

© Christian Bürkert GmbH & Co. KG, Subject to alteration