Visit product website 

DATA SHEET

Type 8805



Ball valve / Butterfly valve

with pneumatic rotary

actuator

Type 2051



Pneumatic rotary actuator

Type 8798



Remote sensor for

pneumatically actuated

process valves

Type 2301



Pneumatically operated

2-way Globe Control

Valve

Type 2300



Pneumatically operated

2-way angle seat control

valve ELEMENT

Type 2103



2/2-way diaphragm valve

with pneumatic stainless

steel actuator (Type ELE-

MENT) for decentralised

automation

Standard | EU | en | 2024 - 03 - 07 | 28

Digital electropneumatic positioner SideControl

• Compact and robust design

• Easy to start up using Tune function

• Integrated diagnostic functions for valve monitoring

• Dynamic actuating system with no air consumption in controlled state

• EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1 or

Bürkert system bus (büS)

The robust and compact positioner is designed with standardisation acc. to IEC

60534 - 6 - 1 or VDI/VDE 3845 (IEC 60534 - 6 - 2) for assembly onto linear and rotary

actuators. In addition, the variant with remote position sensor can be combined

with Bürkert process control valves for closed-loop control. The digital electro-

pneumatic positioner, SideControl, can be operated with all standard current and

voltage standard signals and can also optionally be equipped with the fieldbus

interface. The positioner is equipped with additional diagnostic functions to

monitor the valve. Valve diagnostic messages via status signals are issued in

accordance with NE107 (NAMUR) and recorded as historical entries. The diagnos-

tics can be used to monitor the operating conditions of the control valve which

makes maintenance decisions predictable and optimises the availability of the

plants as required. Operation occurs via the external operating and display module

consisting of a graphic display with backlight. For the user, this results in very

simple and clear operation, which is identical to the Bürkert ELEMENT 8692/8693

positioners and process controllers. The pneumatic actuating system can be used

equally for single-acting and double-acting actuators. It features a defined safety

response in the event of failure of the electrical or pneumatic power supply and has

an enormous air capacity range with pressure supply up to 7 bar.

Product variants described in the data sheet may differ from the product presentation and description.

Type description

Can be combined with

Type 8792

© Christian Bürkert GmbH & Co. KG, Subject to alteration