00772425 datasheet(18/42 Pages) BURKERT

18 / 42 page

Type büS

Detailed project plan 1

DETAILED PROJECT PLAN 1

6.1

Floor plan

Create a detailed project plan using the aforesaid information about devices, cables lengths, topology, junc-

tion boxes and Y-connectors.

Are the devices close to each other?

YES: plan the network with a passive junction box

NO: plan the network with Y-connectors

Rules:

▪ Connect all the accessories on the trunk line

▪ Connect the accessories directly to the device

– Use stub lines to connect the devices

– Avoid long stub line lengths

6.1.1

Network with a junction box

In a network with one passive junction box, all the cables will be viewed as stub lines since there is no trunk

line. Keep the stub lines as short as possible.

Stub

Junction box

Device 1

Device 3

Device 4

Device 5

Device 6

Device 7

Device 8

Device 2

1 m

Fig. 14: Network with a junction box

6.1.2

Network with Y-connectors

A network with Y-connectors without stub lines (directly connected to the M12 connector of the device)

1 m

5 m

7 m

8 m

1 m

Fig. 15: Network with Y-connectors without stub lines

00772425 Datasheet(PDF) 18 Page - Christian Bürkert GmbH & Co. KG