Type 2654

Hygienic

3 | 11

Visit product website 

1.

General technical data

Product properties

Dimensions

Further information can be found in chapter “4. Dimensions” on page 6.

Material

Seal

Seat: stainless steel-reinforced PTFE (FDA conform)

Body gasket, thrust collar and V-packing: PTFE (FDA conform)

Stem seal: silicone

Body

Stainless steel 1.4435/316L

Ball

Stainless steel 1.4435/316L

Selector shaft

Stainless steel 1.4435/316L

Lever

Electropolished, CFM8/1.4408/316

Surface quality

Wetted surface RA < Ra 0.8 μm, electropolished body surface

Medium data

Medium temperature

- 10 °C…+ 200 °C (see “5.1. Pressure temperature diagram” on page 9)

Medium pressure

63 bar (see “5.1. Pressure temperature diagram” on page 9), maximum 6 bar for steam with

seal made of stainless steel-reinforced PTFE

Process/Port connection & communication

Port connection

Orbital weld end variants according to

• DIN 11850 R2

• ISO 1127/ISO 4200

• ASME BPE

Approvals and conformities

ISO head flange

EN ISO 5211

Foods and beverages/Hygiene

FDA

Further information can be found in chapter “2.4. Foods and beverages/Hygiene” on page 4.

USP

Further information can be found in chapter “2.4. Foods and beverages/Hygiene” on page 4.

EC Regulation 1935/2004

Further information can be found in chapter “2.4. Foods and beverages/Hygiene” on page 4.

2.

Approvals and conformities

2.1. General notes

• The approvals and conformities listed below must be stated when making enquiries. This is the only way to ensure that the product

complies with all required specifications.

• Not all available variants can be supplied with the below mentioned approvals or conformities.

2.2. Conformity

In accordance with the Declaration of Conformity, the product is compliant with the EU Directives.

2.3. Standards

The applied standards which are used to demonstrate compliance with the EU Directives are listed in the EU-Type Examination Certificate

and/or the EU Declaration of Conformity.