Type 5413

3 | 14

Visit product website 

1.

General Technical Data

Product properties

Dimensions

Detailed information can be found in chapter “5. Dimensions” on page 7.

Material

Body

Polyamide (reinforced) with moulded-in brass threads

Coil

Polyamide, Epoxy

Seal

NBR

Nominal diameter

DN6.0 mm

Performance data

Compressed air quality

ISO 8573 - 1:2010, class 7.4.41.)

Flow (Q

Nn value air)

900 l/min (measured at + 20 °C, 6 bar pressure at valve inlet and 1 bar pressure

difference)

Nominal operating mode

100 % ED continuously rated

Switching times2.)

Opening

50 ms pressure rise 0…90 %

Closing

30 ms pressure drop 100…10 %

Electrical data

Operating voltage

24 V DC

24/110/230 V, 50…60 Hz

Power consumption

Version with V DC: 2 W

Version with V AC: 11 VA (inrush), 6 VA (hold)

Voltage tolerance

± 10 %

Medium data

Type of medium

Neutral medium, e.g. lubricated or non-lubricated compressed air

Medium temperature

- 10 °C…+ 60 °C

Medium pressure

1…10 bar

Process/Port connection & communication

Port connection size

G ¼

Electrical connection

Tag connectors according to DIN EN 175 301 - 803 Form A for cable Plug Type 2518

Detailed information can be found in chapter “Cable plug Type 2518, Form A accord-

ing to DIN EN 175301 - 803” on page 12.

Approvals and certificates

Degree of protection

IP65 with cable plug

Environment and installation

Installation position

As required, preferably with solenoid system upright; air exhausted from the relief port

with pressed sintered bronze silencer must not be impeded.

Ambient temperature

55 °C

1.) To prevent freezing of the expanded compressed air, the pressure dew point must be at least 10 K lower than the temperature of the medium.

2.) Measured at + 20 °C, 6 bar pressure at valve inlet and 1 bar pressure difference.