Type 6510 / 6511

Multi-Way Valves for Pneumatics

servo-assisted, extendable, 10 mm wide

Technical data type 6510 / 6511 Ex

C 3/2 way valve type 6510,

in de-energized position

port 2 exhausted

Specifications

1) Measured at 6 bar input pressure and 1 bar pressure drop at the valve and at +20 ˚C.

2) All pressure data as overpressure to ambient atmospheric pressure.

Valve specifications

Solenoid specifications

Valve body

Polyamide (PA)

Sealing material

FPM and NBR

Media

Lubricated or

unlubricated compressed

air, neutral gases

Media temperature

–10 up to +50

°C

Ambient temperature

–10 up to +60

°C

Response times3)

Open (On)

23 ms

Close (Off)

27 ms

• Port connections

Sub base

at the valve

• Supply ports 1/3/5 at

Threaded port G 1/8 or

the connection module

plug-in coupling ø 8 mm

• Service ports 2/4 at

Threaded port M5 or

the pneumatic module

plug-in coupling ø 4 mm

3) Measured at connection 2; time from electrical switching to pressure

increase to 90 % (opening) or pressure drop to 10 % (closing)

of operational pressure (6 bar).

Operating voltage

24 V/DC

Voltage tolerance

±10 %

Electrical

power consumption

0.5 W

Duty cycle

100 % continuously rated

Electr. connection

Rectangular plug, 2 pole

on top or downwards

Rating

IP 40 (with rectangular plug

connection)

Ex-approval

EEx ia IIC T6

H 5/2 way valve type 6511,

in de-energized position

pressure port 1 connected to

port 2, port 4 exhausted

Circuit function

Orifice

Flow rate1)

Pressure

All

Service

Supply

QNn-value air

range2)

port connections

ports

ports

at the back

2 and 4 at the

1/3/5 at the

[mm]

[l/min]

[bar]

of the valve

pneumatic module

connection module

C (3/2)

2,5

130

2,5 - 7

sub-base

M5 or

G 1/8 or

H (5/2)

2,5

130

2,5 - 7

sub-base

plug-in coupling

plug-in coupling

ø 4 mm

ø 8 mm

12

10

12

14

Circuit function

Symbol

Symbol

Circuit function

Installation

• Preferably on multistation module assembly

• Block assembly on MP01 or MP02

with DIN/EN-rail 50045

Mounting position

any, preferably solenoid

system upright

Electrical specifications

Power supply only from certified intrinsically safe

circuits with following max. valves:

Explosion group

IIC

Max. safety voltage

U = 28 V

Max. safety current

I = 115 mA

Consumption of energy

P = 0.7 W

for block mounting

(ambient temperature +40

°C)

Consumption of energy

P = 0.7 W

for single mounting

(ambient temperature +55

°C)

P = 0.8 W

(ambient temperature +50

°C)