Multilayer ceramic capacitor

B37941X

MLSC series

MLSC 0805, 50 V and 100 V

Further information

Please see General Technical Information at www.epcos.com/ceramic_capacitors or the data book

“Multilayer Ceramic Capacitors” for further information on:

Soldering directions

Taping and packing

Surface mounting instructions

Effects of mechanical stress

Cautions

Derating: A “state of the art” application design is essential to achieve failures rates at ppb level.

Do not use designs based on 100% of specified rated values.

AC applications may damage MLSC on a much lower level than DC voltage due to power

dissipation losses.

Mechanical stress - Please note EPCOS “General Technical Information”, “Surface mounting

instructions” and information about the effect of mechanical stress.

ESD - EPCOS recommends the use of varistors.

Further processing - care must be taken using moulding processes.

Combined stresses - the total stress (e.g. DC voltage, AC ripple, pulses and temperature) has to

be taken into account to estimate reliability of MLSC.

KB VS PE

July 2005

Please read Cautions and warnings and

Page 13 of 14

Important notes at the end of this document.