Analog Power

ADE4D20120D

Parameter

Symbol

Test Conditions

Min

Typ

Max

Unit

IF = 20 A

1.85

IF = 20 A, TJ = 150°C

1.92

Repetitive Peak Reverse Voltage

VRRM

TJ = -40°C to 150°C

1200

V

VR = 1200 V

10

uA

VR = 1200 V, TJ = 120°C

60

uA

Reverse Recovery Time

Trr

84

ns

Reverse Recovery Charge

Qrr

213

nC

Peak Recovery Current

IRRM

4.3

A

Reverse Recovery Time

Trr

82

ns

Reverse Recovery Charge

Qrr

197

nC

Peak Recovery Current

IRRM

3.9

A

Reverse Recovery Time

Trr

47

ns

Reverse Recovery Charge

Qrr

482

nC

Peak Recovery Current

IRRM

17.9

A

Reverse Recovery Time

Trr

45

ns

Reverse Recovery Charge

Qrr

435

nC

Peak Recovery Current

IRRM

15.9

A

Notes

a.

Pulse test: PW <= 300us duty cycle <= 2%.

b.

Guaranteed by design, not subject to production testing.

Reverse Leakage Current

IR

IF = 20 A, dI/dt = 100 A/us,

VR = 800 V, TJ = 25°C

IF = 20 A, dI/dt = 100 A/us,

VR = 800 V, TJ = 150°C

IF = 20 A, dI/dt = 500 A/us,

VR = 800 V, TJ = 25°C

Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or

guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any

product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical”

parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary

over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not

convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in

systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure

of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended

or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated

with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an

Equal Opportunity/Affirmative Action Employer.

Static

Electrical Characteristics

Forward Voltage

a

VF

V

pF

IF = 20 A, dI/dt = 500 A/us,

VR = 800 V, TJ = 150°C

Dynamic

b

CJ

VR = 200 V, Vsine = 0.6 Veff,

f = 100 kHz

12

Junction Capacitance

© Preliminary

2

Publication Order Number:

DS_ADE4D20120D_1A